Mesin Pembungkus Shrink Film PE Otomatis Mesin Penyusut Lengan
Mesin ini dikembangkan khusus untuk air mineral, minuman anggur, bir, produk dan segera kemasan kombinasi botol obat infus, dengan fungsi stabil, dan barang yang dikemas rapat dan teratur. Ini dapat ditangani sebagai mesin dorong tunggal saat dibutuhkan kecepatan tinggi.
perkenalan produk
Penyusutan Panas Film PE Otomatis-Mesin Pembungkus Pembungkus

Bagaimana Mesin Pembungkus Shrink Film Pe Otomatis Bekerja Mesin Penyusut Lengan
1.After filling, capping and labelling, product containers are then transported into the wrapping unit, by means of a side mounted konveyor.
2.Here, a pneumatic pusher collates the containers into a preselected pack formation,
which upon completion is transferred forward into the welding position.
3.At this stage the pack is clamped, the welding bar descends to complete the wrap,
and the pusher returns to prepare the next collation of produk.
4. As the welding bar ascends the pusher advances to transfer the new collation into the welding position, at the same time displacing the previously wrapped collation onto continuously moving shrink tunnel konveyor.
5.The wrapped collation soon enters the shrink tunnel chamber where recirculated hot air causes the wrap to shrink, and tightly conform to the contours of the contents.
6.Once the pack is out of the hot chamber, forced air cooling is used to tighten the sleeve wrap to achieve a strong, secure pack ready for stacking on a pallet or placing in a shipping carton.
| Model | km |
| Power consumption | Sleeve wrapper 220V/50-6-HZ/1phase |
| Shrink tunnel 380V/50-60Hz/3phase | |
| Max product size | 320(L)150(W)200(H)mm |
| Max Packing capacity | Up to 10 PPM |
| Applicable Film | Film polietilen (PE) |
| Film | 600mm (lebar), 30-100mikro (Tebal) |
| Shrink tunnel | 2800mm(L), entrance 600(W)400(H)mm |
| Shrink tunnel conveyor | Teflon mesh belt conveyor |
| Air pressure | Less than or equal to 0.5MPa(5 bar) |
| Berat (Perkiraan) | Shrink wrapper 220kgs |
| Shrink tunnel 380kgs | |
| Keseluruhan | Shrink wrapper 1200x1000x1800mm |
| Shrink tunnel 3000x1200x1700mm |
Aaron Wang
Manajer Penjualan diMesin Raja
Telepon/Whatsapp/Wechate: plus 86-15262329005
Email:aaron@king-machine.com
Situs web:http://www.king-machine.com/
https://www.liquidpackingmahines.com/
TAMBAHKAN:NO.22 Kota Donglai Tujuh Jalan Timur, Kota Zhangjiagang, Provinsi Jiangsu, Cina
Tag populer: pe film otomatis menyusut mesin pembungkus lengan mesin menyusut, Cina, produsen, pemasok, pabrik, harga, untuk dijual
Kirim permintaan
Anda Mungkin Juga Menyukai







